Ex-Demo VW Caddy Cargo 2021- OS Front Hexaboard Toolbox Van Racking

Ex-Demo: Caddy Cargo 2021- Black Hexaboard Front Toolbox Shelving

Vanimal van racking and shelving is designed and produced on-site in Leeming Bar, North Yorkshire, and shipped throughout the UK and across Europe. Our VW Caddy van racking and shelving units are made from heavy-duty, high-quality 12mm black Phenolic finish hexagonal board plywood. This provides an attractive and resilient textured finish, giving the van racks a strong, stable, and durable build. The external facias are a hexagonal-patterned textured Phenolic on one side and 120 g/m smooth Phenolic on the other.

This rack has been designed for a tailored fit that follows the contours of the body of the 2021- VW Caddy Cargo van, fitting snugly behind the bulkhead on the offside of the van. With a width of 620mm, it gives you the ability to add this unit as an extension of your existing offside rear shelving unit or as a stand-alone racking system.

Racking Dims & Details

• External fascias: Textured Phenolic with hexagonal pattern & 120gm Smooth Phenolic
• OS Front - Width 620mm x Depth 377mm x Height 1055mm (3-tier angled toolbox shelves)

With this 3-tier toolbox shelving unit, there is ample room to store valuable toolboxes and their contents, without worrying they'll be all over the van when you get to your job.

Most of our van racking comes ready-notch to accommodate bungee cords, as shown in product imagery. (Bungees not included).

Our ex-demo van racking is delivered flat-packed but may have been previously assembled for product photography or development. The racks have never been glued but may have screw holes or other minor cosmetic defects, chips or imperfections. Otherwise, these are in as-new condition and have never been used.

We advise drilling 3mm pilot holes before beginning to screw the racking together to help prevent these smooth finish outside facias from cracking.

Easy-Assembly Push Fit Racking & Shelving Design

The Vanimal-branded van racking kit you'll receive will arrive flat-packed, making it more manageable to handle and deliver. Full assembly instructions are included, and depending on design, each rack should take you between 10 and 30 minutes to put together with its easy-to-build push-fit design (mortise and tenon joints + optional wood glue, not provided). Although made of heavy-duty 12mm plywood and a very rigid build, it is still lightweight, making it simple to lift into the back of your VW Caddy Cargo for installation.

Our racking is specifically designed for each van. However, if ply-lined, you may need to trim the end panels slightly due to differences in ply lining from van to van. We've carefully provided accurate descriptions, and where possible, photos of the actual van racks. Some images are for illustration purposes only and may not exactly represent the product or vehicle scale. In all cases, full dimensions are shown on each product.

Why Buy Vanimal Van Racking & Shelving?

• Raw material sourced from FSC-certified sustainable sources
• Made with high-quality, heavy-duty Phenolic 12mm ply
• All our van-racking products undergo vigorous quality assurance checks
• Assembly instructions provided
• Buying direct from the manufacturer
• UK stock and fast dispatch
• Made in Yorkshire