Ford Transit Custom 2012-2023 Front & Bulkhead Makita MakPac Van Racking

Transit Custom 2012-2023 Makita MakPac / Tool Box Racking Features & Benefits

This unique L-shaped racking unit has been designed for a tailored fit that follows the body contours of the L1 and L2 Transit Custom 2012-2023 van, fitting snugly to the van side and bulkhead. Our Vanimal L-Racks are an innovative design, which integrates the bulkhead and front racking units. It is in effect one unit, which maximises storage space by fitting right into the front right corner of the van, making use of space that would otherwise be lost.

This L-Rack has been designed specifically to safely transport and store toolboxes, such as these MakPac boxes from MAKITA. Other toolboxes will fit but please refer to the attached datasheet to check the dimensions. This functional and practical racking system for the Transit Custom offers a further 16 compartments to store tools, cargo, and supplies; plus, the optional bottom rail on the bulkhead section can be removed/omitted, providing more toolbox storage space, should you require.

Vanimal van racking and storage shelving systems are designed and produced on-site in Leeming Bar, North Yorkshire; shipping throughout the UK and all across Europe. Our Ford Transit Custom van racking and shelving units are made from heavy-duty, high-quality 12mm plyboard, which provides a strong, stable, and durable build.

MakPac / Toolbox L-Rack Dimensions & Storage Details

Bulkhead Section

• 6 toolbox-specific storage compartments for Makita Makpac boxes, or similar **Others will fit - check the datasheet for dimensions**
• 25mm front lip on tool box compartments to stop tool boxes from sliding out or moving
• 5 top storage compartments (check the datasheet for dimensions)
• Fitting the bottom rail is optional, allowing for extra toolbox storage, or alternatively;
• Remove the bottom rail to allow for toolbox trolleys to slide under. Hold these in place using bungee cords
• Bungee fixing locations on available on various positions on the racking. (see image example)

Front Section

• 11 Storage compartments (check the datasheet for dimensions)

Overall Dimensions

• RH L-Rack Bulkhead - Width 1360mm x Depth 450mm x Height 1193mm
• RH L-Rack Front - Width 1000mm x Depth 350mm x Height 1193mm
• RH L-Rack Storage - 6 shelves - 3 per side with 6 toolbox compartments + 16 storage compartments
  

All our Transit Custom van racking comes ready-notch to accommodate bungee cords, as shown in product imagery. (Bungees not included)

*Important to note* - The access hatch for under-seat storage is still accessible without restriction if the bottom area is kept free (See images).

Easy-Assembly Push Fit Racking & Shelving Design

The Vanimal-branded van racking kit you’ll receive will arrive flat-packed, making it more manageable to handle and deliver. Full assembly instructions are included, and depending on the design, each rack should take you between 10 and 30 minutes to put together with its easy-to-build push-fit design (mortise and tenon joints + optional wood glue, not provided). Although made of heavy-duty 12mm plywood and a very rigid build, it is still lightweight, making it simple to lift into the back of your van for installation.

Our racking is specifically designed for each van. However, if ply-lined, you may need to trim the end panels slightly due to differences in ply lining from van to van. We've carefully provided accurate descriptions, and where possible, photos of the actual van racks. Some product and dimension sheet imagery is for illustration purposes only and may not exactly represent the product or vehicle scale. In all cases, full dimensions are shown on each product.

Why Buy Vanimal Van Racking & Shelving?

• Raw material sourced from FSC-certified sustainable sources
• Made with high-quality, heavy-duty Phenolic 12mm ply
• All our van-racking products undergo vigorous quality assurance checks
• Assembly instructions provided
• Buying directly from the manufacturer
• UK stock and fast dispatch
• 12-month warranty
• Made in Yorkshire

Racking FAQs for Left-Hand Drive Van Owners:

All our van racking is fully interchangeable, so it can be used on either the left- or right-hand side of the vehicle, meaning that it is perfect for LHD vans too.

Speedy Delivery

You will receive a tracking code for your order as soon as it has been dispatched from our Vanimal production facility.

The courier will need a signature when delivering your order so please ensure that someone is at the delivery destination. If arranged in advance, a safe place to leave the delivery can be assigned.

Quality Control

All the Vanimal racking products are designed and manufactured on-site from high-quality 12mm hardwood Poplar or Phenolic plywood boards and each item is checked to ensure its quality before dispatch. Please contact us should you need to return an item for any reason.

Sustainably and Sourcing

We take environmental concerns seriously and strive to be industry leaders in terms of sourcing sustainable raw materials. We are proud to say that the entire range of Vanimal van racking products is environmentally sustainable and made from Poplar plywood which is FSC certified. Poplar trees are an eco-friendly choice for any product that is made of wood. They grow incredibly quickly and we only source our plywood from sustainably harvested supplies.